To deactivate a monitor actively running on a computer:
1
Open
the e-Surveiller station
2
Click
to select the associated configuration for the
monitor you want to deactivate as shown below.
If
there is no associated configuration in the Monitor
Configurations pane, then click an empty area
on the Monitor Configuration listing area and
press CTRL-SPACE to deselect all configurations.
NOTICE: In this
case, you need to know the Monitor's filename
to deactivate it.
If you
don’t know the Monitor’s filename, visit http://www.e-surveiller.com/help/en/deactivatemonitor.htm for further
help.
3
Select
Deactivate
from the Actions menu OR press CTRL+D.
A window, prompting you to select a folder where
the deactivator program will be stored, appears.
4
Select
a folder.
5
Click
OK.
A message notifying you where the deactivator
was placed appears.
6
Click
OK.
7
Right
click on the configuration for the Monitor you
want to deactivate.
A pop-up menu appears
(as shown below)
8
Click
Properties
on the pop-up menu
The monitor properties
window appears.
9
Note
the Monitor’s filename. You may need it when deactivating
the Monitor.
10
Click Close.
11
Navigate into the folder you chose
at step 4,
where the deactivator program was stored.
The
deactivator file icon is shown below.
12
Transfer this file to the monitored
computer. (You may do so by placing the file in
a shared folder which is accessible from the monitored
computer OR by copying it into a flash disk or
floppy disk and accessing the disk from the monitored
computer.)
13
Run the deactivator on the monitored
computer.
14
You may be asked to enter the Monitor
filename (as shown below)
NOTE: The deactivator
may automatically deactivate the monitor without
asking you for the filename.
15
Enter the Monitor filename
16
Click Deactivate.
If
the Monitor is successfully deactivated, a confirmation
message will appear (as shown below)
17
Click OK.
The Monitor deactivation is complete.
